Fujitsu's latest generation of 15K Enterprise SCSI Hard Disk Drives offer capacities of up to 147GB in a 1-inch high, 3.5-inch form factor. The MAX SCSI series is the latest generation Hard Disk products from Fujitsu offering low profile, high speed and high capacity to high performance enterprise computing applications. The MAX (NP) series comes with a 68-pin interface connector, spindle speed of 15K RPM and capacities of 36, 73 and 147GB. Areal density has doubled and internal drive transfer rates have been increased by 24% to 147 MB/s when compared to the previous MAP series. The drive is also equipped with an 8MB multi-segmented data buffer combined with a 32-bit wide internal data path for faster data access. The MAX NC/NP series supports the Ultra 320 SCSI (320MB/s) interface, which offers new performance and reliability enhancing features such as data packet protocol, quick arbitration and selection, and signal pre-compensation. Leading edge technology enables industry leading performance specifications blended with the latest advances in interface technology, to provide a cost effective storage solution that meets the most demanding enterprise storage requirements.

Fujitsu's latest generation of 15K Enterprise SCSI Hard Disk Drives offer capacities of up to 147GB in a 1-inch high, 3.5-inch form factor. The MAX SCSI series is the latest generation Hard Disk products from Fujitsu offering low profile, high speed and high capacity to high performance enterprise computing applications. The MAX NC/NP series supports the Ultra 320 SCSI (320MB/s) interface, which offers new performance and reliability enhancing features such as data packet protocol, quick arbitration and selection, and signal pre-compensation. Leading edge technology enables industry leading performance specifications blended with the latest advances in interface technology, to provide a cost effective storage solution that meets the most demanding enterprise storage requirements.

Fujitsu's latest generation of 15K Enterprise SCSI Hard Disk Drives offer capacities of up to 147GB in a 1-inch high, 3.5-inch form factor. The MAX SCSI series is the latest generation Hard Disk products from Fujitsu offering low profile, high speed and high capacity to high performance enterprise computing applications. The MAX NC/NP series supports the Ultra 320 SCSI (320MB/s) interface, which offers new performance and reliability enhancing features such as data packet protocol, quick arbitration and selection, and signal pre-compensation. Leading edge technology enables industry leading performance specifications blended with the latest advances in interface technology, to provide a cost effective storage solution that meets the most demanding enterprise storage requirements.

Massive capacity has been achieved through the enhancement of the head, the media and the record processing technology allowing up to 60GB per disk, maximum 120GB per drive (2 disks) high capacity. The enhancement of spindle motor driving technology and the power reduction of controller circuit enable to minimize by 1.6watt at read operation. It is about 0.4watt or less power consumption in compare with 4, 200rpm drives. The enhancement of spindle motor driving technology and the stiffness of mechanism have achieved to reduce the acoustic noise of 2.3 Bels at idle operation. The enhancement of head holding structure to read and write the data of the media enable in high shock tolerance. The drives withstand up to 300Go-p (duration 2ms) operating shock.